USB to RS485 adaptor for JVL MIS motor series

Adaptor for commissioning a JVL ServosStep or QuickStep motor.

When used with correct RS485-M12-1-5-xx cable it is compatible with JVL MIS series 17x, 23x, 34x, 43x.

Ethernet motors MISxxxxxxExHxx6: RS485-M12-1-5-17
RS485 motors MISxxxxxxQ5Hxx6: RS485-M12-1-5-8
RS485 depending on version: RS485-M12-1-5-5
Consult MIS user manual for details

Compatible with Windows XP to Windows 11 

The adaptor can be configured for RS485 two-wire (Half Duplex) networks. When operating in two-wire RS485 the data transfer control is automatically done by the converter. Two independent and RS485 networks can be supported by one module, thus duplicating the possible number of remote devices.

• Computer interface: USB V1.1 2.0 Plug and Play.
• Operational system virtual serial port driver.
• Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
• Field Interfaces: RS-485 Half Duplex (dual buses).
• Automatic flow control for RS485 Half Duplex.
• Transmission rate: from 300 bps to 1Mbps.
• MaximumRS-485 cable length : 1200 m.
• Maximum number of devices in the RS485 network: Half Duplex to 32 devices.
• Power: from the USB port. - Consumption: <100 mA.
• RS-485 bus protection: up to 600W surges.
• USB connection: Mini-B connector. 100 cm cable with the module.
• RS-485 connector: DB 9 male.
• RS-485 connector: DB 9 female with 5 meter cable and 5 pin M12 male connector 
• ABS enclosure: 60 x 57 x 24 mm(not include cable).
• Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing.
  

Only for online sale in North Americars485